Copper-Aluminum Composite PV Ribbon & Busbar Ribbon
Copper-Aluminum Composite PV Ribbon
Raytron’s copper-aluminum composite ribbon is designed for solar-module interconnection with reduced copper use. Choose the conductor section and solder coating for the cell layout and stringing process, then assess resistance, joint strength and module reliability against the existing ribbon design.
Construction and specification
- Material construction
- Copper-aluminum composite or specified copper base with the coating defined by the cell process
- Product form
- PV ribbon
- Width range
- Common PV ribbon widths; custom dimensions by drawing
- Thickness range
- PV module interconnection thickness range; custom by module design
- Surface
- Tin or solder coating options by soldering process
- Packaging
- Spool, traverse wound spool or customer-specified package
Selection and processing
Specify the copper-aluminum construction separately from the solder coating. Compare the required resistance, complete module geometry, conductor mass and joining results with the copper baseline. Reduced copper use at equal size is not the same comparison as an equal-resistance design.
Standards context
Use the drawing and a material/form-specific purchase specification. Round-wire references do not qualify rolled strip, foil or flat wire. Confirm edition, methods and acceptance criteria.
Standards scope referencesProduct questions
What should I send for Copper-Aluminum Composite PV Ribbon supply information?
Width, thickness and tolerances. Edge condition, burr, surface and roll dimensions. Core and outer-layer metals, each layer or ratio, and mass or volume basis. Coating alloy and thickness, soldering conditions, cell layout and spool format. Quantity, spool or coil format, packaging and delivery destination. This identifies the construction and sample or production request to discuss.
What applications are relevant for Copper-Aluminum Composite PV Ribbon?
Copper-Aluminum Composite PV Ribbon is relevant for PV module interconnection, Solar cell stringing, Copper-saving module designs, TOPCon and mainstream module evaluation and related engineered conductor applications where the material tradeoff is validated.
What information should be included in an RFQ for Copper-Aluminum Composite PV Ribbon?
Include product form, dimensions, material ratio or layer requirement, target conductivity or strength, application environment, annual demand, packaging and any test or certification requirement.
Prepare your inquiry
- Width, thickness and tolerances
- Edge condition, burr, surface and roll dimensions
- Core and outer-layer metals, each layer or ratio, and mass or volume basis
- Coating alloy and thickness, soldering conditions, cell layout and spool format
- Quantity, spool or coil format, packaging and delivery destination