Copper Strip
Tin-Plated Copper Strip
Tin-plated copper strip combines a copper substrate with a tin surface for soldered or contacted electrical parts. Specify the copper grade and temper, strip dimensions, plating thickness and coated sides. Include bend, stamping and solderability requirements.
Construction and specification
- Material construction
- Specified copper grade and temper
- Product form
- Strip
- Thickness range
- 0.03-3.00 mm typical
- Width range
- 1.0-300 mm typical
- Temper
- Soft, half hard, hard, custom annealed
- Surface
- Tin-plated copper; specify tin thickness and coated sides
Selection and processing
This page concerns a tin surface on copper. Specify tin thickness, plated sides, finish and the solderability or contact test. Bare copper, nickel plating and embossing belong to separate product requirements; they are not interchangeable surface options here.
Standards context
Use the drawing and a material/form-specific purchase specification. Round-wire references do not qualify rolled strip, foil or flat wire. Confirm edition, methods and acceptance criteria.
Standards scope referencesProduct questions
What should I specify for tin-plated copper strip?
Specify copper grade and temper, strip dimensions, tin thickness and coated sides. Include forming and solderability requirements, inspection criteria and packaging.
Prepare your inquiry
- Width, thickness and tolerances
- Edge condition, burr, surface and roll dimensions
- Metal grade and temper
- Tin coating thickness, coated sides and solderability requirements
- Quantity, spool or coil format, packaging and delivery destination