Web checklist
Composite PV Ribbon Trial Checklist
Prepare the cell layout, conductor geometry, coating and stringing conditions, then define the measurements needed to compare the sample with the current ribbon.
Cell contactsCell interconnectString busbarModule connection
Information to include
Copy these fields into your inquiry and add the values you know. Attach or describe the drawing through the contact page.
Fill in the input cells, then copy the table and paste it into your inquiry. Leave unknown items blank.
On narrow screens, scroll to see all columns.
| Field | What to provide | Your input |
|---|---|---|
| Cell and baseline | Cell layout, stringer model and the copper ribbon used for comparison | |
| Conductor geometry | Round: bare/finished diameter; flat: width, thickness and coating allowance | |
| Layer construction | Core/outer metals, copper ratio and mass or volume basis | |
| Coating and process | Coating alloy and thickness, soldering conditions and spool handling | |
| Trial record | Baseline copper / proposed composite / test conditions / result for resistance, joint strength and module checks | |
| Packaging | Spool, winding direction, tension, camber and splice requirements | |
| Quantity and destination | Sample and production quantities, delivery country and required documents |
Copy before opening inquiry.