Web RFQ checklist
Composite PV Ribbon Trial Checklist
Prepare the cell layout, conductor geometry, coating and stringing conditions, then define the measurements needed to compare the sample with the current ribbon.
RFQ Checklists by Material and Application
Choose a checklist for your material or application. Prepare the drawing, dimensions, surface requirements, quantity and test records needed for a sample or quotation.
Solar-module connections
Web RFQ checklist
Composite Busbar Ribbon RFQ Checklist
Provide the module current path, ribbon dimensions, conductor structure, coating and joint details, plus the resistance and packaging requirements.
Web RFQ checklist
PV Ribbon Specification Checklist
Define the interconnect function, conductor geometry, coating and electrical requirements, then add the joining process, spool details and inspection plan.
Web RFQ checklist
Solar Module Interconnection RFQ Checklist
Prepare the cell layout, current paths, ribbon dimensions, solder coating and stringer settings. Add the peel-strength, resistance and module-reliability criteria that will be used to compare samples.
Clad conductors and cables
Web RFQ checklist
CCA Conductor RFQ Checklist
Specify the CCA construction, copper proportion, finished dimensions and resistance target, together with the joining method and conditions of use.
Web RFQ checklist
CCS Conductor RFQ Checklist
State the electrical duty and mechanical load, then define the CCS form, copper-layer requirement, dimensions and installation or assembly method.
Web RFQ checklist
Nickel-Clad Copper RFQ Checklist
State the NCC form, nickel-layer requirement, electrical duty and joining method, including the temperature and exposure conditions of the finished part.
Web RFQ checklist
Silver-Clad Copper Application Inquiry
Describe the required form, silver layer, dimensions and contact or electrical duty so the proposed construction and sample scope can be discussed.
Web RFQ checklist
Enameled Bimetal Wire Design Inquiry
Provide the conductor construction, bare and finished dimensions, insulation requirements and winding geometry for a combined conductor-and-insulation review.
Web RFQ checklist
Cable Conductor Specification Checklist
Start with the cable construction and electrical duty, then specify the conductor geometry, stranding, resistance, termination and packaging requirements.
Web RFQ checklist
Bimetal Conductor RFQ Checklist
Describe the conductor structure, product form, dimensions, electrical requirement and joining process so the material options can be compared on the same basis.
Rolled metals and windings
Web RFQ checklist
Copper Strip RFQ Checklist
Include the copper grade, temper, dimensions, edge condition and surface finish, then add the forming or joining process and coil requirements.
Web RFQ checklist
Copper Foil Purchasing Checklist
Specify the foil thickness, surface and edge requirements for the intended process, along with roll dimensions, handling needs and inspection criteria.
Web RFQ checklist
Flat Wire Drawing Checklist
Define the width, thickness, corners and material condition, then add bending, insulation, joining and spool requirements for the intended part.